Hello,
Port 6 seem a RS485 Port, the Pico supports RS485 to connect to a second converter.
kann i read the Power invormation from this Port ?
for Port 6, i can't setup anything in Interface :(
my setup:
Port 1-3 Main with 50A clamps
Port 4 Water (impuls)
Port 5 Gas (impuls)
Port 6 Pico ??
any solution ?
the Pico also have an S0 port, is it possible to use the Port 6 ?
Technically "yes"; implemented "no"; wrt S0, as the manual says, the port 6 is a serial I/O, so it cannot be used for pulse input...