Yes
Not on Flukso but Yes using the PVoutput app set to 'add' under Automatic uploads
Kaldek |
As Bazzle says, use PVoutput. I have two DIN kwh counters connected to my Flukso - one for solar and one for consumption. In PVoutput I have these set as a Primary and Secondary Device, one set as "Solar" the other set as "Consumption".
Just make sure you connect your meters appropriately, otherwise your consumption meter might run backwards and still count these as pulses, which stuffs up the measurements.
PVoutput is great because it let me configure my power tariffs. Since the meters are very accurate, it's letting me track my bills and adjust my usage to reduce my costs.
Kaldek |
For reference, here is my other forum post about making sure my meters were wired correctly.
Yes
Not on Flukso but Yes using the PVoutput app set to 'add' under Automatic uploads
As Bazzle says, use PVoutput. I have two DIN kwh counters connected to my Flukso - one for solar and one for consumption. In PVoutput I have these set as a Primary and Secondary Device, one set as "Solar" the other set as "Consumption".
Just make sure you connect your meters appropriately, otherwise your consumption meter might run backwards and still count these as pulses, which stuffs up the measurements.
PVoutput is great because it let me configure my power tariffs. Since the meters are very accurate, it's letting me track my bills and adjust my usage to reduce my costs.
For reference, here is my other forum post about making sure my meters were wired correctly.
https://www.flukso.net/content/solar-and-generation-metering-din-rail-me...
Thanks for your answers.
It is working fine now. It is quite simple, but wanted to be sure.