Internet interruption & missing data to pvoutput.org

by adamcowin on

Hey guys,

Have had some issues with our internet connection over the last two days - its still currently offline and i'm tethering my mobile to get online to ask this question:

I know that the fluksometer will buffer its recordings during an internet outage and when the connection is resumed, it will bulk upload all of the recorded data in one hit to flukso.net dash.

My question is how does say pvoutput.org go when pulling data from flukso.net after said internet outage?

Earlier I managed to get the flukso to connect to my mobile phone's hotspot and it bulk uploaded the data. The flukso.net dash shows the recorded readings pretty much complete for the last two days its been offline - but pvoutput seems to have only imported records from approx 7pm onwards from flukso and didn't import any of the days consumption/generation, that shows on the flukso.net dash

Any ideas?

Cheers
Adam

‹ Cannot connect to FLM to check paramaters. New user - Issue connecting Fluksometer in wifi network ›
adamcowin's picture
adamcowin |

Bump

any ideas?

or could anyone point me in the right direction to find out total consumption and total generation figures from the flukso? Then I can manually enter the figures

cheers
adam

michi's picture
michi |

This is only a guess but, from what I've seen, PVOutput.org seems to stop pulling consumption data from the Flukso site once you stop pushing generation data to PVOutput, and it resumes when you start pushing again. I don't think there is any way to get the missing data back. You just have to accept that there is a gap in the data.

Michi.

adamcowin's picture
adamcowin |

Thanks for the reply Michi,

I've followed this post (https://www.flukso.net/content/api-help-current-kwh) which I managed to get the total figures for the consumption and generation sensors, however it's in kwhperyear and needs to be divided by 365.

I manually put those figures into pvoutput for each day but unfortunatally i havent worked out how to get all the additional data that pvoutput has - IE total imported/exported, generation/consumption/power/average etc in 5min intervals etc.

i've posted on the getsatisfaction.com forum to see if BB may know how to do it - I wish you could export the data from the flukso/flukso dash to a csv file. I could then import that into pvoutput!

i'll post back here if I manage to work out how to do it, or get response on any other forum

Cheers
Adam