Smart meter P1 gate connection

by Glenergy on

Hi,

I'm working on a project with a dutch smart meter. We are trying to make connection between a flukso FLM 02 and the smart meter, to create a external connection.

We want to use the use the P1 poort from the meter an connect it with the analog port. For this we use a regular RJ45 cable,but we don't know which wire should be connected with which analog input port.

I know it would probably be easier if i just use the Ethernet gate, but doesn't seem to work either.
I hope the question is clear enough for you to help me.

Kind regards

‹ how to hook up the FLUKSO to a P1 port on a Smart meter? Flukso API PHP Class ›
gebhardm's picture
gebhardm |

Well, I must admit that I actually don't understand the request. So maybe you can clarify following questions:
1) Which FLM version 2a or 2b? Only the 2b has a P1-capability on port 6 (see https://www.flukso.net/content/fluksometer-v2b)
2) What do you mean by "connecting to analog port"? The analog ports can be uses with an impedance compatible current clamp only - the voltage used for current read then is 0 to 1V1...
3) Or do you have a 2a? Then there would be the possibility to connect an (if existing) pulse output/S0 of the meter to one of the pulse ports #4 or #5 as described in the manual.
BR, Markus

Glenergy's picture
Glenergy |

Thanks for the reply

1) Its a 2b version.

2) I want the read the data in the analog ports that are normaly used for the current clamps, but i'm not sure that's even possible (reading data in the ports)

The problem is that we have a smart meter, with a regular p1 port. But we want the data from the meter retrieved from a different place. For example, the meter is at home but want the data to read from my work.

The data from the meter should then be output through the Flukso

i hope its a bit clearer.

I apologize for the lack of info, but for me the flukso is completely new, so i can't provide the most technical information.

Thanks