Wifi connection

Dear all,

I follow the online manual to install my flukso, but I encounter some trouble trying to connect with the Internet via my wifi network…

Here follows a description of the steps I undertake, hopefully someone can point out my mistakes;
(pictures: http://s76.photobucket.com/user/Marieline/library/)

While my pc is connected to our wifi network ‘SCARLET_WIFI_5’, I connect it to the flukso with an ethernet cable (see yellow cable, picture ‘Flukso’). The Ethernet, Power and Heartbeat LED blink.
In the ‘Network and Sharing Center’ both my wifi network and the ethernet connection ‘Network 2’ are listed (see picture).

I surf to http://192.168.255.1. The ‘status’ screen is filled with errors (picture ‘Flukso status screen’), so I move to the wifi screen first. Here I fill in ‘SCARLET_WIFI_5’ as SSID. I use the password I chose when I installed my wifi network as ‘key’ (picture ‘Flukso wifi screen’).

I push the ‘save’-button. The update of the wifi configuration starts. As the manual already said, the first two steps don’t take long. The step ‘re-initializing wifi stack’ however seems to be endless.

I repeated this process several times, both with the wifi network at home and at work, waited for more than 3 hours, but never got through the step ‘re-initializing wifi stack’.
This way the ‘status screen’ stays erroneous and the Globe LED never gets to blink.

Can anyone give me some advise?

Greetings,
Marieline