Combine P1 and P2 to 1 graph both on FLM02A and FLM03E

by dieterwijckmans on

Hi,

I currently have 2 flukso meters running in my home
Flukso garage: FLM03E
Flukso Voor: FLM02A

Flukso voor has 2 power clamps connected (P1+P2) + 1 water clamp (P4)
I would love to have the calculation of both power clamps as one reading in my flukso dashboard.
I found this thread: https://www.flukso.net/content/combine-only-2-clamps
Implemented everything but I'm getting following error in the syslog:
Oct 6 11:31:05 flukso-1b6e80 daemon.err fluksod[23847]: POST https://api.flukso.net/sensor/0123456789abcdef0123456789abcde1: 401
Oct 6 11:31:05 flukso-1b6e80 daemon.err fluksod[23847]: WWW-Authenticate: No proper provisioning for this sensor

Is there something else I need to configure here?

FLM03E has 2 power clamps connected (P1+P2) and 1 power clamp on solar (P3)
On the FLM03E there's an option on the GUI that makes it possible to do math.
In the gui I see "PORT2 + PORT1" but when I select it nothing is happening.

Did I misconfigured / miss something here?

All help is appreciated.

‹ DSMR 5.0 Support for ISKRA AM550 looking for a used but working Fluksometer v2b ›
jgysenbergs's picture
jgysenbergs |

Here's a 'me too'. - JG

dieterwijckmans's picture
dieterwijckmans |

I figured it out eventually.
In the FLM02A just put it at 3-phase and wait for a resync as long as nothing is attached on the T3 it's working as expected
In the FLM03E PORT2 + PORT1 started working after a couple of tries.

KR

Dieter