Hi,
I have a Flukso v2b (currently firmware 250) that I bought a few years ago and worked great with the P1 port of my Dutch smart meter. I recently moved and brought my Flukso with me. The new house had an analog meter so I requested a new one and the operator installed the ISKRA AM550. I attached the Flukso but it sees nothing. I tried with cat /dev/ttyS0 and only when I connect/disconnect the cable do I see anything on the console, otherwise nothing.
I little research showed that this meter uses DSMR 5.0 protocol on the P1 port. Is this or will it be supported by the Flukso v2b? Do I need a different cable connection to the Flukso?
These threads (in Dutch) have a bunch of info on the new meter and the DSMR 5.0 standard:
https://community.qurrent.nl/qbox-24/werkt-de-qbox-met-de-iskra-am550-of...
https://forum.eneco.nl/storingen-en-problemen-112/slimme-meter-14026
https://www.wijhebbenzon.nl/media/kunena/attachments/3055/DSMRv5.0FinalP...
I'm quite competent in linux but electronics aren't my thing, so any pointers would be helpful.
Thanks!
Chris
Ping. Curious if anyone has ideas so I can get monitoring alive again!
No idea what's the problem with your new smart meter, but have you ever tought to use an din-rais kwh meter with puls output ?
In my old house I used a DIN rail meter with pulse for my PV installation, and the smart meter P1 port for mains in/out and gas. I could go to clamps but then I need hardware and can't determine direction of current, and would have to do something else for gas. So the P1 port integration is really what I need but this new DSMR 5.0 protocol seems to be the blocker.
@icarus75, You can use my device for development if you want because otherwise it's unused right now...
Bump. Hoping a solution is coming!