You would need to mark the sensors as single phase, I do something simular (but I have a single phase setup): I use the other inputs to monitor specific circuits :)
icarus75 |
Right now, you have to choose. Either you get the sum by selecting a 3-phase setup, or you get each of the phases plotted separately by opting for (three) single-phase inputs.
sherlock |
is that a global preference or only for the for a flukso internet DB and graphing?
Can I still get separate phases over api if I graphs single phase in the Flukso graphs in the INTERNET?
Maciej
icarus75 |
That is currently not the case. When selecting the three phase option, measurements from the three clamps are added together into a single sensor right after sampling in the FLM. So with this option, your three clamps form a single sensor.
I guess what you are asking for is support for the creation of a 'virtual' sensor on the server that would group several 'physical' sensors. You would then be able to plot this virtual sensor alongside the physical sensors. Correct?
sherlock |
Yep that would be nice, to be able to group and add (or substract for PV/wind) the sensors on the server to form one graph. I already included that in my local visualization app for Android, just need my Flukso to finaly arrive to test it with.
icarus75 |
Are you using a native Android app or an HTML/JS one?
PS: You can check the status of your shipment with the tracking number and web site printed on your invoice. Go to the My account -> orders tab to see the invoice online.
sherlock |
Native, its just a framework now, i need to add api calls to feed the graphs with the realtime data. Will share as soon as it is any working.
And talking the API, what are the interval values I can use? the pdf only says minutes and i guess i'll get last 60 seconds array.
What are the other options: hours,days,weeks,months are all allowed?
BTW. just checked that they did deliver my unit, tooday just after i left office.
icarus75 |
Have a look at chapter 3 of the Fluksometer Manual [1] for more API details.
You would need to mark the sensors as single phase, I do something simular (but I have a single phase setup): I use the other inputs to monitor specific circuits :)
Right now, you have to choose. Either you get the sum by selecting a 3-phase setup, or you get each of the phases plotted separately by opting for (three) single-phase inputs.
is that a global preference or only for the for a flukso internet DB and graphing?
Can I still get separate phases over api if I graphs single phase in the Flukso graphs in the INTERNET?
Maciej
That is currently not the case. When selecting the three phase option, measurements from the three clamps are added together into a single sensor right after sampling in the FLM. So with this option, your three clamps form a single sensor.
I guess what you are asking for is support for the creation of a 'virtual' sensor on the server that would group several 'physical' sensors. You would then be able to plot this virtual sensor alongside the physical sensors. Correct?
Yep that would be nice, to be able to group and add (or substract for PV/wind) the sensors on the server to form one graph. I already included that in my local visualization app for Android, just need my Flukso to finaly arrive to test it with.
Are you using a native Android app or an HTML/JS one?
PS: You can check the status of your shipment with the tracking number and web site printed on your invoice. Go to the My account -> orders tab to see the invoice online.
Native, its just a framework now, i need to add api calls to feed the graphs with the realtime data. Will share as soon as it is any working.
And talking the API, what are the interval values I can use? the pdf only says minutes and i guess i'll get last 60 seconds array.
What are the other options: hours,days,weeks,months are all allowed?
BTW. just checked that they did deliver my unit, tooday just after i left office.
Have a look at chapter 3 of the Fluksometer Manual [1] for more API details.
[1]: http://www.flukso.net/files/flm02/manual.pdf