I just added to my Flukso V2b a water pulse sensor number 3 to my two other pulse existing electricity sensors. I set the clamp ports number to 1 so all the other ports 2-5 are pulse ports.
Water Pulse Sensor 3 http://i1289.photobucket.com/albums/b503/Molari1/WaterSensor3_zps270f5f9...
Solar Production Pulse Sensor 4 http://i1289.photobucket.com/albums/b503/Molari1/SolarProductionSensor4_...
Home Usage Pulse Sensor 5 http://i1289.photobucket.com/albums/b503/Molari1/HomeUsageSensor5_zpsb2d...
The syslog below shows that the Flukso is receiving the pulses from the water sensor but I cannot see the pulses in the Dash nor in PVoutput. In the Dash I am receiving in Hourly and Daily display an error:
"Error - No water sensors to display. Please select another sensor type.
"The electricity sensors are working properly as I see it.
Syslog http://i1289.photobucket.com/albums/b503/Molari1/FluksoSyslog-HomeUsagea...
PVoutput Water Extended data http://i1289.photobucket.com/albums/b503/Molari1/PVoutputWaterExtendedda...
As I remember when I set up my Flukso in mid April and connected the electricity sensors to inputs 2 & 3 they did not work but when I switched them to outputs 4 & 5 they work properly. I am therefore wondering if my Flukso V2b is faulty or there is any other thing that I not setting right.
Tx
Can anybody from Flukso help with this problem please? Tx
Im not from Flukso, only Icarus is..
After a days use check the water usage in Daily Flukso graph. (It wont come up until a day has passed). Same with hourly.
Also try the Flukso page in IE or Chrome? I had some issues with IE.
After logging in do you see the water sensor in the gearwheel (tools) page where you see the electricity sensors activated?
After you get the Flukso page working (If!) then play with pvoutput.
Good luck Baz
Thank you Bazzle.
The water sensor is visible in the gearwheel (tools) page with all the other electricity sensor so as I understand it is activated.
I am trying this water sensor for the last 3 day...
I tried to see the Flukso page in 3 different browsers - still the same error:
"Error - No water sensors to display. Please select another sensor type. " The electricity chart is working in any browser fine and the PVoutput for electricity is fine too.
I also tried in Monthly, Daily & Hourly.
In the syslog I can see that the Flukso it is actually registering the pulses from the water sensor xxxxxxxx39e9eaf537eb9770c7390 but I cannot see the pulses in any other place on Flukso graph. (I posted the syslog in my first message above).
No idea what to do next, but as I said before:
When I set up my Flukso in mid April and connected the electricity sensors to inputs 2 & 3 they did not work but when I switched them to outputs 4 & 5 they worked properly on the spot.
I am therefore wondering if my Flukso V2b is faulty or there is any other thing that I not setting right.
Hopefully "bart' Icarus will respond to you.
If you're seeing pulses being registered in the syslog on ports 2 & 3, then the FLM hardware should be ok. I'm now tracing your FLM. Could you leave a tap running for a minute so that we can trigger some pulses for your water sensor?
Thank you Icarus.
I should have at least 10 pulses at 10:15 GST.
You can also see the pulses in my syslog from few days ago that I posted in the first message
http://i1289.photobucket.com/albums/b503/Molari1/FluksoSyslog-HomeUsagea...
Tx
The problem with your ports 2 and 3 not showing any data were due to a server-side provisioning error. Should be fixed now. Can you confirm by doing the tap test one more time? You should see data appearing on the hour chart within five minutes after running the tap.
It's working!
Thank you very much Icarus!
cool