My smart meter seems to be reporting fine to the Flukso through the P1 port
The data shows on the Flukso as below but the dash initially didn't show the smart sensors.
After half an hour the main electricity started reporting and after an hour or so a few gas resukts came through.
- !
- /ISk5\2ME382-1003
- 0-0:96.1.1(xxxxxxxxxxxxxxxxxxxxxxxxxx)
- 1-0:1.8.1(00001.492*kWh)
- 1-0:1.8.2(00000.000*kWh)
- 1-0:2.8.1(00000.000*kWh)
- 1-0:2.8.2(00000.000*kWh)
- 0-0:96.14.0(0001)
- 1-0:1.7.0(0000.56*kW)
- 1-0:2.7.0(0000.00*kW)
- 0-0:17.0.0(0999.00*kW)
- 0-0:96.3.10(1)
- 0-0:96.13.1()
- 0-0:96.13.0()
- 0-1:24.1.0(3)
- 0-1:96.1.0(xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx)
- 0-1:24.3.0(xxxxxxxx0000)(00)(60)(1)(0-1:24.2.1)(m3)
- (00000.310)
- 0-1:24.4.0(1)
- !
The syslog has produced lots of these
- Dec x xx:xx:xx flukso-xxxxx daemon.warn avahi-daemon[644]: server.c: Packet too short or invalid while reading probe record. (Maybe a UTF-8 problem?)