Hello,
I am on a delta grid, 230V L-L, 3 phase here in Belgium.
I installed solar panels yesterday.
The inverter is single-phase, so it is connected to L1-L2, for example.
Now I am under the impression that my flukso adds the production of the solar panels to my consumption.
So instead of my grid consumption going down, it is going up.
Is this possible?
Carl
You need 2 input probes, either mag loop or pulse output.
One on solar input to switchboard.
One on consumption to loads.
does this work with a V2 flukso? or only with a V3?
Same for both afaik.
I have an Fluksometer v2b with pulse inputs active.
I only have single phase
On a 3-fase star grid N-L1-L2-L3, I have 3 clamps connected for the phase current, but I also want to include the PV production (1-phase). How can I achieve this? Do I need to attach a pulse sensor to port 4, 5 or 6?
I have a very difficult (and yet simple) installation, 3-phase grid connection, 1-phase PV (L1), 1-phase homebattery (L1) that balances grid use on sum of 3 phases and a digital meter from DGO that registers consumption and injection separately.