Hello Bart,

Unfortunately, nothing works Flukso. The network connection was the
Flukso suddenly disconnected. After a reset, you can still see the
Home Flukso up again, the settings are made ​​by
a restart away. The device transmits data no more to the
Server. You can also sign up not with SSH and FTP.

How do I enable the Flukso device again?

Best regards, Heinz

Hi,

is there a documentation of the pin connections to the flukso.sensor.board.v1.2? On the board 10 pins are available. Which pins are the inputs for?

Regards Heinz

flukso.sensor.board.v1.2

- Does the wireless AP need to online 24/7 ?
(My wireless router is on a timer switch that turns of the AP during the day, when nobody is home).
- What security mechanisms does the Fluksometer support? Does it support WPA?
- Does the Fluksobox need the adapter to be attached (annoying and stupid, since the box is IN the main power box)?

Thanks,

Dieter

Gday All
Ive been getting some very unusual readings with my flukso. Its a single phase with a 2nd clamp for monitoring my Solar PV output.

Ive been getting some very unusual spikes & dips. The red trace is main power consumption & blue trace is solar PV output. You can see how sometimes they both seem to follow each other, even though they should be totally seperate.

Has anyone installed a Flukso in the USA?

In a typical residential setup, power is provided in a split phase, with 120V on each leg. See here: http://en.wikipedia.org/wiki/Split-phase_electric_power

I believe this would just require two current clamps connected in series. Anyone agree or disagree?