hanskraayeveld | Wed, 10/12/2014 - 00:12 wrote
The last minute show... When I flush the toilet I always use 5,5 liter water. So in dash this should be 5 or 6 liter. In one minute 5 or 6liter,
Or most of the time, in 2 minutes.
The first minute 1, de second 4 or 5.
Or 2 and 3/4 3 and 2/3 And go on.
But... I see only the first minute. The last minute, flukso remembered, and 2 hours later you flush the toilet again, and you have used 2 hours long 0,05 liters/ minute! Or something like that. I want have the real live usage.

When my pulse counter counts on 19.15 5, in dash 5 liter on 19.15 or 2 on 19.15 and 3 on 19.16 should be counted!

Based on (recurring) discussions in the installation section, I think it makes sense to review and if possible, rename, or revamp the visualiation units used in the flukso dash.

A review of CURRENT resolution and axis labeling: (abbreviations used: E:electricity - G:gas - W:water)
Resolutions:
HOUR tab => data at 1 minute resolution
DAY tab => data at 15 min resolution
MONTH/NIGHT tab => data at 1 day resolution
YEAR tab => data at 1 week resoltion.

Default visualisation units:
E: Watt, G&W: lperday.
Other options: E: kWh/y , Wh, Whcumulative //
Options for G&W: l/min, m³/y, l, liter cumul

Actual data plotted (for default unit):
* Except for Wh, WhCumulative and l and liter cumul view, the graph always contains "timestep integrated average usage" during the resolution interval:
Measured consumption [energy, quantity] in resolution interval [E: J, G&W: l ], possibly rescaled to other base [E: J=> Wh, J=> kWh, G&W: l => m³], and then divided by the "resolution interval length" (min, day, hour, etc) [in E: s, G&W:day].
* For Wh, WhCumulative and l and liter cumul view, the average power / water/gas draw is summed over the resolution interval (E: Wh/min * min, G&W : l/day *day) and then plotted or cumulatively plotted.

I tryed to re install it again and now I have:

./configure
Node.js configure error: No acceptable C compiler found!

Please make sure you have a C compiler installed on your system and/or
consider adjusting the CC environment variable if you installed
it in a non-standard prefix.

I start with a fresh Rpi.

I would love to have an IHD (in home display) to show live FLUSKO data with colour visualisation similar to these ideas:

Wattson meter shows red/green colour depending on import/export of electricity:
http://s27.postimg.org/oz5wyw6qb/wattson.jpg

emonGLCD shows generation/consumption/net(+/-) usage:
http://s23.postimg.org/3t57pevbf/emon.jpg

Like these apps running on a cheap android device (itself based on another open source app):
https://www.flukso.net/content/android-app-fluksometer

I'll see if I can d/l the source code and have a hack at it, can't be too hard :)

... make wiki with all info & possibilities of the Flukso. I think much information is lost. Much of it is "somewhere" on the forum but it's difficult to find it there.

Maybe the wiki can be maintained by all Fluksonians ?

Thx !