I have my flukso now for more than 2 weeks and these are my suggestions.
I will post one suggestion per topic so people can react

When working over ethernet (not wifi), one cannot enter a fixed ip-address for the device.
The workaround is to make a 'reservation' in the dhcp server.
Although it works, it is not user-friendly. A lot of people don't know how a dhcp server works,
let alone that they know how to make a reservation in a dhcp server.

It would be much better to just let people choose a fixed ip-adress if that want that.

Bonjour,

Dans Jeedom Script j'ai mis:

Type script: JSON
Requête: curl -k -v -X GET -H "Accept:application/json" -H "X-Version: 1.0" -H "X-Token:1818d9e666ee92a39097c7302999c1b9"
Options (URL du ficher JSON): "http://api.flukso.net/sensor/f6276e2f33731d5776bd610f8b85078c&interval=month&unit=watt"

ERROR:
1.Message de script: Echec de la requete http: Curl error: malfommed.
2. Message de http.com Erreur curl: maformed sur la commanden après 4 relance(s)

Bien à vous

Il y a la possibilité de télécharger les donnes par API local in real time dans une box domotique (Jeedom, ZiBase Mini, Domoticz) ou dans le PC?

I'm curently sending the smart-main readings from Flukso to PVoutput which works fine. The Flukso is hooked up to the P1 port of my smart meter and has a sensor called smart-main energy. The smart-main sensor is however based on the calculation consumption - generation (from solar panels) which are both available as separate readings from the P1 port interface.

I'd like to read out the consumption data as a separate reading as well as I monitor my solar panels before the smart meter and I can use PVOutput to calculate all the values I'd really like to know (generation, total consumption and solar panel self consumption).

Is this already possible and if not, could I submit this as a feature request for a future firmware update.

By default when you check your water usage it goes to l/day
In my case on the graph this shows as example today 3,727 litres. This is what PVOutput see's and logs as well. :(
If you change the Unit to litres or cumulative the reading becomes accurate, 39L, at least on the Flukso site untill you refresh or reopen the page.
Can one of these be made the default instead of the miss reading one as above?
In the case of water I find the cumulative scale the best to show usage as you can take 2 points to estimate usage.

Similar for Gas.

Thanks Baz