I own a Flukso device since only one day, and I already have a lot of questions needing a lot of answers :-p
Here is one of my questions:
where is data stored? On the server-side? or locally in my device?
when I click on the Dash menu while beeing at work, it tells me that it cannot display anything because I am not in the same network as my device. This makes me think that data is stored locally.
But on the other hand, in the Dash menu, you can add data from other people. This is for sure on the server-side.
Cheers,
Louis

Hello Fluksonians, I'm not familiar with everything higher than 12 volts. So, after reading several entries about rewiring the fuse box, I thought I could rewire the PV wires as indicated in the first jpg? Would this be right?

Also attached is a jpg of the 'Dash page' which shows the PV yield in blue and my own - obviously wrong - consumption in red.

http://www.gysenbergs.info/data/fluksoconnect.jpg
http://www.gysenbergs.info/data/dash.jpg

Thanks for reading. Any advice is most welcome.

- Jos Gysenbergs, Belgium

Connected the second of my two new flukso meters. I have a good WLAN connection and it reports a "succeeded" flukso server ping. Just like the first one. But also "synchronisation with sensor board failed". Did I do something wrong?

Regards, Hans

Hello All,

We just purchased two of these Flukso units and 5 x 50a ct's. As I am eager to get this system up and running, I wondered if I could ask some questions.

Will both of these Flukso transmitters work on the same network? I am
planning on using one on Ethernet monitoring our workshop power usage and solar
generation. (from the workshop switchboard i.e 2 ct's)(Solar feeds back in to this board)

The other Flukso on the house switchboard using wireless to monitor
total consumed power/main A-Con and off peak tariff Hotwater & Pool Filtration. (i.e. 3 ct's)

Currently we have our Aurora solar 5kw PV system reporting to "http://www.pvoutput.org/intraday.jsp?id=9311&sid=7556" and would also like to
get our total power is use as well as pv generation onto that website.

Can you please let me know if we will have any issues with this
configuration?

This is all a single phase 240v installation.

Will we be able to to see all ct measurments from the two systems on the one Flukso website dashboard and labeled what they are?

We are doing a trial to assess the Flukso system as we have many
customers that after a decent energy monitoring solution.

Thanks in advance,

Tony
ASA Electrical

I live in India. My apartment (which is actually two apartments joined together by the owner) has 2 meters and 2 distribution boxes. Both are 3 phase supply.

Since this would mean 6 sensors, if I understand the manual correctly, is there any way I can do this with one FLM?

Thanks for helping out.

Ram