Installation

Questions about installing and configuring a Fluksometer.

Create RRA graphs

Hey,

I love flukso, and I love my own server at home. :$
So ideal would be that I can combine both.
Sadly flukso sensors don't providing snmp out of the box (yet?).

I've wrote a small script that read each minute the sensors, and put the data in different rra graphs (based on the sensor ID).
You can find the script here as attachment. Comments are more then welcome (I'm not a scriptwriter, I'm a network guy).

And after that, you can open the rra graphs with your favorite program (fe cacti, nagios...):

https://www.flukso.net/sites/default/files/Overview1.png

Water Probe - 80k liters in 35minutes?

Hey All

My new flukso turned up yesterday arvo and i'm like a kid in a candy store :D

I'm slowly muddling through the setup. I've wired in the water meter and i'm in the process of trying to set it up with-in the flukso. But i'm receiving some weird readings.

Apparently between 22:10 and 22:45 this evening, I've gone from using 0k lperday to almost 80k liters per day? and looking on the minute graph, it seems to alternate between 71/72k in 5 second intervals.

I'm in Australia and whilst i haven't been able to find out much information about my water meter, it is pretty much identical to the grenade style one shown in the photo on the flukso shop/water probe section (Kent V100)

I've done a bit of digging trying to find out what the meter is and I believe its a Elster V100 - same as a Kent V100?

They list the specs as 5L/Pulse (PDF Specs: http://wwwbe.elstermetering.be/downloads/V100_SML001_Spec_aus_0905.pdf)

The probe is connected to the flukso on port 4, with the class as Pulse and constant as 5.

Obviously i've not got something setup correctly here. Can anyone help and tell me what i've got wrong?

Attached with this post is screen shots of the day and minute graphs, along with the sensor setup

Thanks in advance
Adam

Brick?

Hello,

I got my Fluksometer yesterday and did the initial LAN/WIFI configuration in order to integrate the Fluksometer int my home network and everything seemed ok. Then I found out, that I entered a wrong SSID in the WIFI section. I did a reset (>60 sec Toggle). Then I restarted the Fluksometer (power on/off) and got the follwing error message:

/usr/lib/lua/luci/dispatcher.lua:284: No valid theme found
stack traceback:
[C]: in function 'assert'
/usr/lib/lua/luci/dispatcher.lua:284: in function 'dispatch'
/usr/lib/lua/luci/dispatcher.lua:195: in function

I could access all the status screens, but could NOT change
any setting. What should I do?

PV production during the night ?

Hallo All,

How is it possible that Flukso records PV output during the night.

My Pv array is monitored by A : Solaredge ( Manufacturer of the inverter )
B : Qurrent ( for my wife Jacqy )
C : Flukso

The measurements are provided by 2 din rail meters in series S0 output 1 to Qurrent and 1 to Flukso.

A you can see in the attachments Solaredge no production, Qurrent no production, Flukso production just 5 watt but if you add it all up its about 30 to 35 wh.

Your input to solve this is highly appreciated.

Thanks in advance