Hi,

I currently have 2 flukso meters running in my home
Flukso garage: FLM03E
Flukso Voor: FLM02A

Flukso voor has 2 power clamps connected (P1+P2) + 1 water clamp (P4)
I would love to have the calculation of both power clamps as one reading in my flukso dashboard.
I found this thread: https://www.flukso.net/content/combine-only-2-clamps
Implemented everything but I'm getting following error in the syslog:
Oct 6 11:31:05 flukso-1b6e80 daemon.err fluksod[23847]: POST https://api.flukso.net/sensor/0123456789abcdef0123456789abcde1: 401
Oct 6 11:31:05 flukso-1b6e80 daemon.err fluksod[23847]: WWW-Authenticate: No proper provisioning for this sensor

Is there something else I need to configure here?

FLM03E has 2 power clamps connected (P1+P2) and 1 power clamp on solar (P3)
On the FLM03E there's an option on the GUI that makes it possible to do math.
In the gui I see "PORT2 + PORT1" but when I select it nothing is happening.

Did I misconfigured / miss something here?

All help is appreciated.

Running flukso now for about 3 years.
Till yesterday, I had just 2 clamps on my 3Phase Without Null, connected to Fluksometer v2b.
I used F1 & F3 for my house, F2 & F3 for my garage. The clamps were on F1 & F2.
This gave me a nice view on the house (0.5K avarage) and the garage (1K average).

But I want to use PV in the future, and thought to install a new clamp on F3. What I did.
I've put in the Flukso config the power towards 3Phase, which moved my graph from 2 to 1.
But when I check now my graphs of the last 12 hours, I've got an average of 4K. What sounds a lot to me, no?
Following ENI (power regulator), I've got a yearly consumption of about 9000 KwH.

What do you think of this? Are my reading a bit off? And if so, what could be wrong?

ps the 9000KwH are to much (reason for a PV installation), but can be understandable. Continue Server/POE switch for HA and videosurveillance, Fish pond, Aquarium, Terrarium... But I thought it would be more around +/- 1500KwH?

I am trying to copy files to the FLM using various scp clients. WINSCP mentions unexpected end-of-file. pscp mentions the same, but also /usr/libexec/sftp-server: not found. This suggests that the sftp server does not start. Note I am connecting to the FLM through Wi-Fi. (SSH works).

Hi,
My Flukso v2b has all ports in use, now I'm looking for a used but working Fluksometer v2b.

We had a power outage last night, for about a minute. After the power came back on, my Flukso v2 did not connect to my wifi network any longer. Looking at it, only the power and heart LEDs are on solid.

Power cycling the Flukso did not help. After connecting via ethernet, I get link level connectivity (ethernet LED is on), but the Flukso will not assign an IP via DHCP.

I assigned 192.168.255.99 as a static IP to my laptop and tried to ping 192168.255.1, which should be the Flukso, but no joy.

I tried holding the toggle button in for well over a minute while the Flukso was powered on, but it didn't reboot. So, it looks like it is thoroughly bricked. Any way to bring it back to life?

If the hardware is toast I'd like to buy another one. But, looking around on the web, I can't find any outlet in Australia. Is it possible to buy a Flukso here at the moment? If so, where?

Any help would be much appreciated, I'd like to sort this out quickly if possible, so I don't lose too much of my consumption data.

Thanks,

Michi.