Installation

Questions about installing and configuring a Fluksometer.

Data being posted but no graphs

by moolenschot on

Hi
I hope some one can help me, I have installed a FLM about six weeks ago and have not been able to see any graphs on the Flukso Dash, the only one that works is the minute one which tells me that the sensors are working fine. the FLM has the heartbeat and globe light light and I can see in the sys log data is being posted, also when I log in to the Flukso web into my account I can see the sensors and the latest heartbeats being received. Is there a problem with the Flukso servers? or have I purchased a faulty unit.
Any help appreciated.

no reading from P1 kamstrup

by amigo on

Hi,

this day i received the flukso box. Looking pretty good!

Its configured on my local network on ip 192.168.0.142 and my mac is on 192.168.2.100. All working fine, meaning I can connect to the webinterface.

I hooked it up to the P1 port on my dumb kamstrup meter, but I am not getting a signal. Isee posts in the syslog like POST https://api.flukso.net/device/40e73c4b:200 but i dont have the feeling it is recording something.

What I am unsure of is that the sensor page only shows 5 sensors, but the P1 hangs on port 6... so maybe it is still disabled, but on flukso.net i see prefilled 2 smart-main sensors, so i guess these i need, so asking the api for http://192.168.0.142:8080/sensor/2dc07068223f32292bcf960cdd9b23ce?versio... should return some readings isn't it ? anyway it returns something, but it is an empty array.

I must admit that i reset the box twice (>10<20 secs) and i ran fp1 once from terminal.

can you help me out ?

rgds

Pieter

here is some more info
root@flukso-4xxx:/www/sensor# /etc/init.d/flukso restart
Daemon returned 0 as return value.
Daemon returned 0 as return value.
Daemon returned 0 as return value.
Daemon returned 0 as return value.
Daemon returned 0 as return value.
Daemon returned 0 as return value.
root@flukso-4xxx:/www/sensor# /etc/init.d/flukso stop
root@flukso-4xxx:/www/sensor# cat /dev/ttyS0
????????????????????????

and syslog complains about empty telegrams

Minute view on Dash - timeout after a few minutes

by vk2him on

Hello all,

I'm new to Flukso after installing today. I have my minute dash displaying nicely however I see it stops loading after about 5 minutes - I have tried a few devices (iPad, PC etc) and it stops on all of them after a while. If I reload the page it works again for a while but stops again,

Is it possible to have the minute page continue to load?
Thanks
Ian

only Net readings in FLukso Dash graph

by jamverp on

Unfortunately I cannot find a search option in this forum so I just make a new post.
Although I think my question is already solved by others.

I only get the Net readings (consumption - PV), how do I get the graphs seperated in my dash?

Thanks in advance

Regards

Empty smart meter P1 telegrams

by bellyf on

I'm getting empty telegrams:
 <date> flukso-336da5 daemon.err parsed[690]: /usr/sbin/parsed.lua:131: decoder returned an empty telegram

When I inspect the output of my smart meter (Landis + Gyr ZMF110) I see the following output:

  1. root@flukso-336da5:~# /etc/init.d/flukso restart
  2. Daemon returned 0 as return value. (total 6 times this line)
  3. root@flukso-336da5:~# /etc/init.d/flukso stop  
  4. root@flukso-336da5:~# cat /dev/ttyS0
  5. h?֪?V???????fggf?d??޽y=gif?6m6????֭?=V???6?6???V??????,???խ?=V???lٴg?g?YY??????V?????֖V?6???6??,v??,֖v֭?=gi??6?lZ????vV?6-Y?l-)թ??=gi?l6?lZ???????6????-)թ??=gi??6?lڳ???vֶ6?l?l-)թ??=gi?l6?lڳ??????6????-)թ??=V???lٴgٴ?????֭?=gi??6-ٴ???6?lֶ-)U??=gi?l6-ٴ???6????-)U??=V???6?6?????lZl-)U??=V???lٴf?g??֭?=V???lٴd??g?????֭?=V???lٴd?c?????֭?=gi???lZ,ٴ?????V???lٴd?gcky=gi?,?6-?6???????֭?=gi??ٳ?f????????֭?=gi?,ٳ?f????????֭?=gi?,?6-66???????֭?=gi??ٳ?f????????֭?=gi?,ٳ?f????????֭?=V???lٴgf?g???=V???lٴgf?????=gi?,?6-ٴ???ֶ??+?gi??Y6-ٴ???????+?gi?,Y6-ٴ???????+?gi?l?6-ٴ???6????-)U??=gi??Y6-ٴ???6mY?d?JTky=gi?lY6-ٴ???6?6??-)U??=gi?l?6-ٴ???6????-)U??=gi??ٳ?d????6????-)U??=gi?lٳ?d????6????-)U??=V??lv6?6?????֭?=V???lٴg???Y?f???֖?V??,֖??֖??,?,??֖v֭?=V??lv6m6???V??????????????V?6??l?R?ky=V??lv6?ٴ??֭?=o?????=

I have some of this behaviour in other posts but I'm unsure what to do next.

I have done a factory reset more than once. Should I issue a  fp1 command (only once)?